Double Adjustable
Lower Control Arms
Large 1-14 thread adjuster for brute strength.
4130 .120" wall construction.
Tig welded.
Delrin bushings for zero deflection.
Available 5/8" fastener upgrade. $279.00
Single Adjustable
Lower Control Arms
Delrin bushings for zero deflection.
4130 .120" wall tubing. $199.00
Non-Adjustable
Lower Control Arms
Delrin bushings for zero deflection.
4130 .120" wall tubing.
Awesome factory replacement $199.00
Double Adjustable
Lower Control Arms
For Use With Coil Overs Take advantage of the new wheel well room when using coil overs.
Maximize tire space.
4130 .095" wall tubing.
Available 5/8" fastener upgrade $199.00
Double Adjustable Upper Control Arms
Used by many NMRA racers 4130 .312" thick, .120" wall tubing $199.00
Non-Adjustable
Upper Control Arms
Delrin bushings for zero deflection.
4130 .312" thick, .095" wall tubing.
$129
Anti-Roll Bar Light weight 4130 construction.
Delrin bushings will not bind & gall like aluminum & are stronger than a bearing.
Used by many NMRA racers. This is extreme duty. We dont sell anything else. $259.00
Fox Body
Manual Brake Adaptor
Includes Strange Large 1.125" bore
master cylinder & all stainless hardware. Constructed of billet 6061 aluminum. Recessed bore for added clearance. Our kit requires the pedal to be drilled for proper lever ratio. $199.00
( includes mods to pedal)
Fox-body Race
Steering Column
Light weight 4130 construction.
Bolt-in application.
When we build custom
headers, these are a must.
Small profile frees
up room
for gentle flowing tubing radii.
Used by many NMRA racers. $179.99
Fox-body Race
Steering Column (Quick Release Hub)
Same as our other bolt-in column
but includes a Strange Quick-Release
Hub & U-joint.
Light weight 4130 construction.
Used by many NMRA racers. $339.99
Wheelie Bars
Non-spring loaded 70-inch
1 3/8" double slip for
your Outlaw 10.5 car $799.00
Wheelie Bars
Spring loaded 50-inch
bar for Drag Radial $559.00
Parachute Mount A must when using a launcher. 4130 lightweight construction Used By many NMRA racers. Universal fit $199.00
5.0L Fuel Rails
Our rails enter & exit front to back eliminating the dead head cylinder #5 lean condition. Extruded 6000 series aluminum CNC machined rails & hold downs. Polished finish stainless hardware.
3/8" NPT thread on ends.
.560" bore flows enough fuel to feed 2000+ horespower
$189.99
99-01 Cobra Fuel Rails
4V Cobra & Mach 1 intakes.
Want to go return style?
Extruded 6000 series
aluminum CNC machined
rails & hold downs.
Polished finish stainless hardware.
3/8" NPT thread on ends.
.560" bore flows enough fuel to feed 2000+ horespower
$189.99
Fox Body Aluminum Gas Tank (13 gallon)
Want to run an external pump
& need a sumped tank? Our BBRC aluminum tanks will not rust like a steel sumped tank.
Our tanks are a direct bolt-in using our provided aluminum straps. Utilizes factory grommets for your factory filler neck & sending units.
H& crafted & tig welded with a newly designed baffle system & larger sump in 2007.
3/4" NPT outlet - 3/8" NPT return - 3/8" NPT vent 13 gallon $479.99
1998 Mustang Cobra
Gas Tank
Want to run an external pump
& need a sumped tank? Our BBRC aluminum tanks will not rust like a steel sumped tank.
Our tanks are a direct bolt-in using our provided aluminum straps. Utilizes factory grommets for your factory filler neck & sending units.
H& crafted & tig welded with a newly designed baffle system & larger sump in 2007. 3/4" NPT outlet - 3/8" NPT return - 3/8" NPT vent 13 gallon
$479.99
Ford EGR Spacers
Made from billet aluminum & available in four sizes:
70mm
75mm
80mm
90mm $29.99
EFI Conversion
Power
Elbow
Our lightweight sheetmetal construction is used by many racers because of its even flow distribution transition from a 4 inch round to square plenum opening Includes throttle bracket. $239.99
Aluminum Control Arms
Fits 1993-2004 GM F-Body
Made from 6061 aluminum.
These lightweight control arms use polyurethane bushings & have
gone high eights on a
stock-suspended Firehawk. $199.99
Double Adjustable
Control Arms
Double adjustable 4130 .095" wall construction lowers move inboard for maximum tire clearance. $159.00
Parachute Mount A must when using a launcher. 4130 lightweight construction Used By many NMRA racers. Universal fit $199.00
LS1 Fuel Rails
Give your LS1 the fuel it needs. Going return style? Made from 6000 series aluminum our CNC machined rails come with polished stainless steel hardware.
3/8 NPT thread on ends.
.560" bore flows enough fuel to feed 2000+ horespower
$159.00
LS2 Fuel Rails
Want to go return style?
Putting an LS2 in your 1969 Camaro & need to run an aftermarket fuel system? These rails are for you. Made from
6000 series aluminum our CNC machined rails come with polished stainless steel hardware.
3/8" NPT thread on ends.
.560" bore flows enough fuel to feed 2000+ horespower
$159.00
LS7 Fuel Rails
Need rails for your LS7 manifold? We have what you need. Made from 6000 series aluminum our CNC machined rails come with polished stainless steel hardware.
3/8" NPT thread on ends.
.560" bore flows enough fuel to feed 2000+ horespower.
$159.00
1993-97 F-Body
Gas Tank(17gallon)
Want to run an external pump & need a sumped tanks? Our BBRC aluminum tanks will not rust like a steel sumped tank. They are a direct bolt-in using our provided aluminum straps. Utilizes your factory grommets for the factory filler neck & sending units. Make your fuel system install easy with our aluminum tank.
3/4" NPT outlet- 3/8" NPT return - 3/8" NPT vent version
$599.00
1998-02 F-Body
Gas Tank(17 gallon)
Want to run an external pump & need a sumped tanks? Our BBRC aluminum tanks will not rust like a steel sumped tank. They are a direct bolt-in using our provided aluminum straps. Utilizes your factory grommets for the factory filler neck & sending units. Make your fuel system install easy with our aluminum tank.
3/4" NPT outlet- 3/8" NPT return - 3/8" NPT vent version $599.00
2004-06 Pontiac
GTO Gas Tank(18 gallon)
Features internal baffles
3/8" NPT vent 3/8" NPT return
3/4" pipe feed and
comes with custom
sending unit
3003 construction
Accepts factory filler
$649.99
EFI Conversion
Power Elbow
Our lightweight sheetmetal construction is used by many racers because of its even flow distribution transition from a 4" round to square plenum opening Includes throttle bracket. $239.99
LS1 Billet Valley Cover
Dress up your LS1 with our
CNC-machined billet
aluminum vallery cover.
Includes stainless steel
flathead hardware. $79.99
